Description
Electronics starter kit includes:
– 1x Breadboard 400 points MB102
– 10x LED Yellow
– 10x LED Green
– 10x LED Red
– 2x LED RGB
– 2x Push button cap blue
– 2x Push button cover yellow
– 2x Push button cover green
– 2x Push button cover red
– 6x Push button
– 2x Buzzer
– 30x Breadboard jumper wires
– 10x Resistance 100R
– 10x Resistance 220R
– 10x Resistance 330R
– 10x Resistor 1K
– 10x Resistor 4.7K
– 10x Resistor 10K
– 10x Resistor 47K
– 10x Resistor 100K
– 10x Ceramic capacitor 100PF
– 10x Ceramic capacitor 10NF
– 10x Ceramic capacitor 100NF
– 10x Ceramic capacitor 2.2NF
– 10x Electrolytic capacitor 10UF
– 10x Electrolytic capacitor 470UF
– 1x Male pin header 40
– 1x Potentiometer 10K
– 1x Resistor card
– 1x Plastic box
F.Zuidema (verified owner) –
Handy starter set to start prototyping on a raspberry PI. The buttons supplied in the box are actually a bit too big to stick on the breadboard because then you have little room left for other larger components with 3 buttons. But otherwise ideal!
Evert (verified owner) –
Nice set for a beginner. Was a bit of a search to determine the Ohm values. I managed it using pictures on the internet.
It might be useful to add this to the product description. The cards do have a color code:
– 10x Resistance 100R = yellow
– 10x Resistor 220R = blue
– 10x Resistor 330R = black
– 10x Resistor 1K = red
– 10x Resistor 4.7K = pink
– 10x Resistor 10K = green
– 10x Resistor 47K =brown
– 10x Resistor 100K = purple
Daan –
Nice handy box.
About the color coding: in my case the colors were the same, except for 100R (no color) and 4,7K (yellow).