Description
ESP8266 IOT Board an 'all-in-one' ESP8266 WiFi development board with USB and battery charger. It is an ESP8266 WiFi module with all the extras you need, the main part is an ESP8266 WiFi microcontroller clocked at 80 MHz and 3.3V logic. Programmable with the Arduino IDE via the usb serial chip with autoreset. To make it easy to use for portable projects, there is a connector for 3.7V Lithium-polymer batteries and built-in battery charger. Also works fine without battery from the micro usb connector. Comes fully assembled and tested, with a USB interface to use with the Arduino IDE or NodeMCU Lua. Pre-programmed with the Lua interpreter. LiPoly battery and USB cable not included.
ESP8266 IOT Board Specifications:
– Dimensions: 50mm x 35mm
– ESP8266 @ 80MHz with 3.3V logic
– 4MB FLASH (32 MBit)
– WiFi 802.11 b/g/n
– 3.3V regulator with 500mA peak current output
– CP2104 USB-Serial converter 921600 max baud rate
– Auto-reset support
– 9 x GPIO pins with I2C and SPI
– 1 x analog inputs 1.0V max
– 100mA LiPoly charger with status indicator LED
– Pin #0 red LED general use. Pin #2 blue LED bootloading debug
– Power/enable pin
– Reset button
- Manual
Reviews
There are no reviews yet.